Load sensing variable speed control system to the throttle of engine, torque converter, gear box to collect a variety of data to be processed and then generates an electrical signal, the gearbox in the appropriate time automatic shift, can further reduce the parking time

Loaders load sensing variable speed control system can reduce the operating cycle and reduce the fuel consumption rate of 15%, improve operational efficiency and economy at the same time, it can reduce by a traveling direction change or due to engine in high speed shift caused by the impact of shift and reduce driver fatigue.

Loading machine load sensing system can reduce the loader of the power demand to an astonishing degree, loading machine equipped with electronic servo control and information system is composed of a liquid crystal display screen and a keyboard, used to display and record all information and the automatic diagnosis function to record the machine fault and storing all the relevant information, through coding can be anti-theft computer management and monitoring is the 1990s foreign loading machine development is an important sign of computer monitoring and management system continuous management / monitoring loader dozens of parameters, and has the function of fault diagnosis and alarm, record, loading machine operation of all kinds of information, and for liquid crystal display device can display the working state of the components

Linkage can bear great torque load, has excellent reliability, durability and parallel lifting mechanism is similar to the work performance of the working device in horizontal position lifting or lowering the decentralization of materials on the pallet can be matched with a plurality of operation device, maximize reduce the driver from the ground to the maximum height of the bucket tilt angle adjustment.

Loader in 3000 hours after the operation, the instrument will appear, cab jitter phenomenon, and the phenomenon of more and more serious jitter, and even the cab, the whole machine also produce jitter. Jitter phenomenon caused by the machine material weighing is not accurate, can not be used normally. Shandong loader below the technical staff to give you an analysis of the reasons for the jitter caused by what?

1, loader hydraulic system using a priority mode, the output of the pump and the pressure of the pump output pressure oil combined with the work of the device. Working pump only when the operating device to bear the load, while the steering pump not only in the work of the load when the action, steering also bear the load, so the pump working time is relatively long, wear.

2, loader in the valve body, valve core, pressure regulating spring and the pressure of oil under the common function, EF port open and close according to a certain frequency of mutual transformation, then a certain frequency of vibration. Because the vibration is close to the natural vibration frequency of the instrument and the cab, it leads to the resonance of the instrument table and the cab.